陶瓷三輥機產品概述

1.高精度研磨(最小間隙可達1μm以下，視物料固性質而定)

High precision grinding (minimum 1um , depend onmaterials

2、功率大、可加熱制冷，可分散實驗室高粘度材料

High power, can be heated and cooled, and can disperse high viscosity materials in the laboratory

3、單手柄調節輥間距，無極調速;間隙模式/扭力模式，顯示扭力曲線

Single handle adjustment of roller spacing, stepless speed regulation; Gap mode/torque mode, displaying torque curve

4、進口納米級陶瓷輥，多種材質可選

Imported nanoscale ceramic ollrs with multiple materials to choose from

5、間隙修正方便快捷，無需拆卸設備外殼

Gap correction is convenient and fast, without the need to disassemble the device casing

6、陶瓷輥精度:同心度<2μm、直線度< 2μm、表面平整度< 0.3μm

Ceramic roller accuracy: concentricity < 2μm. Straightness<2um. Surface flatness < 0.3μm

7.指紋識別，專機專用，扭力曲線動態反饋材料分散狀態

Fingerprint recognition, dedicated to special aircraft, torque curve dynamic feedback material dispersion status

三輥機通過水平的三根輥筒表面互相擠壓、不同轉向及速度差， 所產生的剪切力而達到研磨及分散效果。

The three roll machine utilizes the shear force generated by the   mutual   squeezing,different   

turning   directions,and   speed differences  of  three  horizontal  roller  surfaces  to  grind  and disperse materials.

MTR 系列三輥機的間隙控制方式精準穩定，基于幾何學原理，通 過控制軸心包絡線夾角來調節輥筒間隙，真正意義上實現

對輥筒間隙 的線性控制，可處理多種粘度漿料，分散效果好，將較寬分布的物 料處理為窄而尖的分布。

The  clearance  control  method  of  the  MTR  series  three  roll  machine  is  precise  and  stable.Based  on geometric 

principles,the roller gap is adjusted by controlling the angle between the axis envelope lines,truly  achieving linear

control of the roller gap.Realizing linear control of roller gap in a true sense,it can handle various viscosity slurries with 

excellent dispersion effect,and can transform materials with a wider distribution into narrow and pointed distributions.

陶瓷三輥機參數